Low level attenuation and sunshape (G)

Introduction

Low-level attenuation and sunshape are two factors strongly related with the atmospheric components in the path between the Sun and the solar collector or the solar system. The atmospheric components are not homogeneously distributed in the sun path, and thus, they various solar technologies in different ways. In the case of solar thermal electricity two main parts in the solar path can be identified: the part between the top of the atmosphere (TOA) and the solar reflector; and the part between the solar reflector and the solar receiver. As the distance between the solar reflector and the solar receiver increases the the low-level attenuation also increases in the system. Therefore solar tower systems are strongly affected by low-level attenuation.

Low level attenuation is an important factor for the performance of central receiver concentrating solar power plants. The low-level attenuation affects the transmittance from the focusing mirrors (the heliostats) to the central receiver. It can occur either due to fog, water vapor or low-level aerosols. Aerosol particles are solid and liquid particles in the atmosphere that are not clouds or precipitation. Low level attenuation can vary independently from the overall atmospheric aerosol attenuation and therefore need to be assessed at the location.

A portion of the direct normal irradiance (DNI) that is scattered as it passes through the atmosphere is scattered into the forward direction and is included in the DNI as measured by pyrheliometer. These have a field of view of ≈5° and DNI measurements during cloud-free conditions include irradiance from this scattered DNI depending on AM and AOD. The solar beam does not only go in a straight line but covers an angular range around the direction of the sun. This circumsolar irradiance initially occurs since the sun disk covers an angular range and can be exacerbated by aerosols and thin ice (cirrus) clouds. The angular distribution of solar radiance around the sun disk is called the sunshape.

While the sunlight coming directly from the solar disk can be concentrated very efficiently by large scale solar thermal electric facilities, systems with high concentration can only partly use this circumsolar radiation. As different solar concentrating designs can utilize the circumsolar radiation differently and as the collector efficiency varies continuously with the angular distance from the sun center, it is important to characterize and understand the sunshape in order to accurately assess the solar potential of a given site. The sunshape can be roughly described with scalar parameters as the circumsolar ratio and the circumsolar contribution (the contribution of the circumsolar irradiance to DNI for specific angular intervals). The effect of the sunshape on the plant performance is most relevant for highly concentrating systems.

(G) Policy making

Low-level attenuation and sunshape characterization is an important factor for building a bankable dataset. Policy makers should ensure that these types are data are being gathered at a number of locations so that there can be expertise in these kinds of measurements and developers can understand how these measurements affect the predicted performance of the system.

The further development of instruments that can accurately measure the sunshape should be encouraged. For near-future scenarios with high grid penetration of solar and other types of renewable energies, the effects of major volcanic eruptions with a 100 year return rate on the sunshape should be considered.

The recommended features for the low-level attenuation and sunshape characterization for this application are the following:

  • Input parameter for calculation: DNI.
  • Time resolution: daily.
  • Period of time: long term.
TABLE 1. LOOK UP TABLE OF CATEGORIE AND USESGrey cells in Table 1 are later described. Cells width N.A. legend, means that no relevant applications are showed later.
Users
Proyect developers needs at diferent plant stages Other users
Category of product service (A) Pre-feasibility (B) Feasibility & Design (C) Due Diligence Financing (D) Plant Accep-tance Test (E) Systems or Plant Operations (F) Grid operators (G) Policy makers (H) Education / Outreach
LOW LEVEL ATTENUATION AND SUNSHAPE

Low level attenuation measurements and characterization.

Sunshape measurement and characterization

The relevant features for the low-level attenuation and sunshape characterization in the field of solar energy are:

  1. Input parameter for calculation.
  2. Type of measurements.
  3. Time resolution.
  4. Period of time.